The B-G Steering Wheel Quick Release System allows the user to quickly and easily attach/detach the majority of aftermarket steering wheels from the hub, offering the ultimate anti-theft solution by allowing complete removal of the steering wheel when not in use.
Produced from high quality aluminium for maximum durability, the B-G Quick Release System features a push-pin mechanism to prevent premature unlocking.
Utilising a multi-drilled PCD bolt pattern, this version of the B-G Steering Wheel Quick Release System allows users to fit a modern steering wheel with a 6x70mm / 6x74mm PCD such as MOMO, Nardi or Personal to vehicles with a classic 6x101mm / 9x101.6mm PCD hub such as Mountney or Moto Lita.
This quick release fits between the steering wheel and the hub.
WARNING: The replacement of the steering wheels on cars equipped with airbag systems will disable both the functioning of the airbag of the driver and that of the passenger or any other airbag fitted to the car. For cars equipped with airbag systems, our steering wheels are intended for racing and show use only. Do not attempt to install this kit yourself unless you have been properly trained in the installation and maintenance of car steering wheels. Do not attempt to install this kit without having previously read the instruction manual. Incorrect installation can lead to steering wheel failure which can cause an accident resulting in serious personal injury or death. Caution: Reduced steering wheel diameter will cause increased driver steering effort.
|Nett Weight||0.68kg - 1.49lb|
|Gross Weight||0.78kg - 1.72lb|
|PCD Bolt Pattern||6x101mm / 9x101.6mm Hub to 6x70mm / 6x74mm Steering Wheel|
Q. Does this quick release system fit within the footprint of the boss (for instance MOMO) kit or does it effectively add to it, thus spacing the wheel closer to the driver?
A. Using this quick release system will bring the steering wheel approximately 60mm closer to the driver.